But I see you have u-boot version 3 installed, mine did come with version 1 from factory one month ago. Had to do some manual labor to correct the u-boot. Note: Although the cabling can be located outdoors, the EdgeRouter itself should be housed inside a protective enclosure. NOTE: It is currently not possible to enable IPv6 offloading for PPPoE and VLANs simultaneously. IPsec offloading requires a device reboot to become active/inactive

UniFi - Rethinking IT - Ubiquiti

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed. Make sure to keep your fingers, conductive tools and serial cables away from the high voltage at all times! In this section I will discuss the EdgeRouter (both version 4 and Lite) and see how they compare with USG. NOTE: *Offloading support for Bonding on Cavium devices is available starting from the v2.0.0 EdgeOS firmware release.The EdgeRouter 4 has been engineered to provide high-speed, reliable internet. It shines in tasks that demand high internet speeds like streaming and gaming. Its performance makes it an ideal router for users who require consistent, high-speed internet. For information about compatible fiber SFP modules, visit: ubnt.link/SFP_DAC_Compatibility Accessing the EdgeOS Configuration Interface As we have mentioned in the USG review section, the ER-Lite is exactly the same hardware as the USG, so in this paragraph I will discuss the ER-4 only. USG is the entry level router/firewall product in this series. The other options include USG Pro 4 and USG XG-8 which are much more powerful in terms of hardware performance. Hardware Specs

EdgeRouter - How to Upgrade the EdgeOS Firmware EdgeRouter - How to Upgrade the EdgeOS Firmware

Only the initial setup wizard for setting up your router with a WAN and LAN interface has been run. Although you can connect with SSH to a USG device and start configuring things with the CLI, the changes will not be permanent because they will be overwritten by the UniFi Controller management software.The next step is to generate your configurations for the server and your clients as well as certificates to go with them. You can do this easily by following the Creating Certificates and Keys Guide. Generate everything on your PC or Mac and then take a note of the path to your server folder that is created, we will be using the files here later on. SNMP, LLDP, NTP, UBNT Discovery Protocol, Syslog, NetFlow, Web UI, Ubiquiti Network Management System (UNMS) and CLI (GUI, Console, SSH, Telnet) Compared to USG, the only difference in features is that ER models do not support IPS/IDS like the USG. If you really need to have such a functionality in your network, you can always use an open source IDS software (like snort for example) and just send traffic to it for inspection (with a mirroring port/VLAN). There are two platforms that are used by different EdgeRouter models. Each platform has its own offloading support and unique commands to enable the functionality. The platforms are: MediaTek