Swanson Tool S0101 7-inch Speed Square Layout Tool with Blue Book

Product Information

Next, a good speed square will include high contrast and high visibility markings. You will use a speed square in different lighting conditions, so it should be easy to read in different scenarios. You’ll never know how you got by without a speed square once you’ve tried it out. Speed Square Construction

If you need to draw a straight line across a board to rip it down, it is super simple to do so with a Speed Square! First off, they are precision built with accurate frames. A speed square is only as good as its squareness and its ability to mark 45-degree angles. All speed squares that made our shortlist were square out of the box. Framing squares are used by carpenters, metalworkers, engineers, hobbyists, DIYers and roofers. Conclusion Alternatively, you may prefer a wooden speed square, offering a traditional speed square layout tool that possesses greater durability than a plastic speed square. However, a wooden speed square may possess shallow scribing notches, which may reduce the longevity of the tool due to the reduction in visibility and subsequent accuracy. Many of the best speed square tools are currently made from aluminum, offering a strong and durable material that offers weather-proof and rust-proof properties. An aluminum speed square provides the deepest available scribing notches, ensuring that the numerals on your speed square are fully visible and readable regardless of the lighting conditions. Weight

A speed square is a hand tool used in woodworking and carpentry projects. Its triangle shape is well suited for marking accurate 90-degree and 45-degree lines. Speed squares are also referred to as carpenter or rafter squares. Regardless of the name, they’re all the same tool. Embedded degree gradations on the tool eliminate the need for trigonometric calculations and allow for lines to be more easily made. This aluminum speed square is popular among reviewers, with one person writing that it “draws a clean, straight line and with the extra extension up to a foot.” It’s a perfect tool not only for roofing, but for wood laminate floors as well. Instead of flipping the square to match the first line, you can “just fold down the extension” for a single clean line. Readability:A high visibility speed square is a must for any job. Whether it’s changes in lighting or flipping the square from left to right, it needs to be readable at any time. Look for a rafter angle square with a strong color contrast between the scale and the markings, and markings on both sides of the tool. In particular, laser-etched markings will last the longest. You often see the Speed Square being used as a way to make sure everything is perpendicular and square while building. That is just a scratch on the surface of everything that tool is capable of!

A speed square (aka “rafter square” or “triangle square”) is a measuring multitool. Made of steel, aluminum, or plastic, this common carpenter’s tool combines a ruler, a Try square, a protractor, a line scribing tool, a common-width board ripping guide, and a saw guide for making accurate 90° and 45° cuts with a hand or circular saw. A speed square’s main uses are A 12-inch speed square is most handy for cross cuts on wider workpieces, such as 2 x 8 lumber and larger, as well as certain sheet goods. Who makes the best speed square?

Speed Square Buyer’s Guide

To accurately mark cutting lines, carefully line-up the lipped fence along the edge of the wood and press firmly so that the speed square does not move. Using the top edge of the speed square, mark your cutting lines. This position is also perfect for a guide when cutting using a saw. The most common size of speed square is 7-inches, allowing you to accurately measure cutting lines for a wide range of projects and tasks. However, if you are completing larger projects and tasks containing larger lumber, you may require a 12-inch speed square. Readability

The tool is an isosceles right triangle with a ruler on one equal side and a fence on the other. It is marked with the word Pivot at the right angle point and displays Degrees on its hypotenuse, Common and Hip/Val markings on its midsection.as a protractor, for easily finding and marking various common angles, especially roof rafter pitches and angles for stair stringers (the vertical supports on a stairway). Membership connects and supports the people and projects that shape our future and supports the learning Speed squares can be used to measure the pitch of a roof and to lay out angles from 0 degrees to 90 degrees. Features offered